Produktai skirti wangzhi assxzq cno (8)

Induction hardening machines

Tape and reel specification for all CXSM SMD crystals.

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. LVDS 'F' Group characteristics. RoHS Compliant. TCXO with LVDS output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. Miniature 7 x 5 x 2.8mm ceramic SMD package Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant 'F' Group characteristics. Frequency Range 38.880MHz to 432.0MHz. Product Series Code TCXO:EMF576D VCTCXO: VEMF576D Frequency Range:12.0MHz to 800.0MHz Output Waveform:LVDS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Standard Frequencies:(Partial list) 12.8, 16.0 19.44, 20.0, 25.0, 27.0, 30.0, 32.0 Frequency Stability (see table) vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±0.3 ppm max. ±5% change Supply Voltage:+3.3 Volts Differential Output Voltage VOD:247mV min., 355mV typical; 454mV max., Output 1 - Output 2 Differential Output Error dVOD:-50mV min., 50mV max. Output Offset Voltage VOS:1.125V min., 1.200V typ., 1.375V max Offset Magnitude Error dVOS:0mV min., 3.0mV typ., 25mV max Rise and Fall Times:1.5ns typical Duty Cycle:50%±5% Start-up Time:5ms typical, 10ms max. Current Consumption:12MHz to 24MHz: <33mA max., 24MHz to 96MHz: <50mA max., 96MHz to 800MHz:<85mA max Output Load:50W from each load Drive Capability:100W between LVDS and Complementary LVDS Storage Temperature:-55° to +125°C Phase Jitter (RMS) (12kHz to 20MHz):0.4ps typ., 0.5ps max

C arisma has its own efficient internal Logistics Office which ensures rapid deliveries by land and sea everywhere, taking care of all operational and regulatory aspects of the transport of ADR and IMO classified chemical products. Our products are delivered: locally in 1000 liter IBCs, in 200 liter drums, in 25 and 5 liter canisters; in customized packaging upon request in Italy and Europe in single-compartment or multi-compartment tankers, in 1000-litre IBCs, in 200-litre drums

Base Group to wykonawca konstrukcji przemysłowych. Specjalizujemy się w tradycyjnym i zrobotyzowanym spawaniu aluminium, stali nierdzewnej i stali czarnej. Spawanie wykonujemy zgodnie z międzynarodowymi standardami określonymi w normie ISO 3834-2. Na zamówienie Klienta dostarczamy konstrukcje przemysłowe wyprodukowane zgodnie z normą EN 1090-2, EN 1090-3 oraz EN 15085-2.

Milling machines

Cnc Machined Parts

Battery Cycle Count A typical cell phone battery goes through approximately 500 cycles before retaining at least 80% of its original capacity. Made from new materials, our batteries have zero cycles, ensuring the maximum number of cycles you can use. Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Months Warranty